• Big 10" (254 mm) Diameter Vacuum Pads
• 180º Edgewise Rotation
• 90º Tilt, Vertical to Flat
• Operates on 110 Volts AC
• Weekly Rental or Lease to Purchase Plans Available

Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. They may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.

Standard Pad Spread:
Cat. No. P2110445DC: 51" x 54-1/4" (1.30 x 1.38 m)
Cat. No. P2HV110445DC: 50" x 53-1/4" (1.27 x 1.35 m)

Number/Size of Pads:
Cat. No. P2110445DC: 8/11" (280 mm) Diameter Lipped
Cat. No. P2HV110445DC: 8/10" (254 mm) Diameter Lipped

Lifting Capacity:
Cat. No. P2110445DC: 1,400 Lbs. (635 kg)
Cat. No. P2HV110445DC: 1,200 Lbs. (545 kg)
(on smooth, non-porous surfaces. Call for recommendations on other surfaces.)

Average Unit Weight: 171 Lbs. (78 kg)

Standard Operating Power: 12V DC, 10 AMP (for each Pad Channel).

Load Movement: Manual rotation, 180º edgewise, with locking in three positions. Manual tilt, 90º between upright and flat, with automatic latching in upright position. (Units can be tilted ONLY when the lift bar is locked in the center position, as shown in drawings.)

Standard Features:
On-Board Battery and Charger
Battery Energy Gauge
Low Vacuum Warning Light
Vacuum Gauge
Vacuum Line Filter
Vacuum Reserve Tank

AVAILABLE OPTIONS:

For All P2 Series Channel Lifters:

AC Power System
Cat. No. P2110445AC
Cat. No. P2HV110445AC
Cat. No. P211047AC
Cat. No. P2HV11047AC

Remote Control System Cat. No. E08RC

Removable Control Pendant Cat. No. E09RP

Dual Vacuum System Cat. No. E010DVS

Individual Pad Shutoffs Cat. No. CM1C0WB

Closed Cell Foam Pad Rings Cat. No. FRHV11 (available on P2HV1104 units only.)

Counter-Balancer Cat. No. CB1S

COMPONENTS:

Pad Channels:
Each channel features an independent, on-board vacuum generating system, including vacuum pump, vacuum controls and standard features as listed above.

Cat. No. PC1104 (for Flat Materials): 4/11" (280 mm) Diameter Lipped Pads

Cat. No. PC1004 (for Curved Materials): 4/10" (254 mm) Diameter Concaved Pads

Cat. No. PCHV1104 (for Rough Materials): 4/10" (254 mm) Diameter Lipped Pads Lift Frames

Cat. No. PCFT1A1: For One Pad Channel

Cat. No. PCFT2SA45: For Two Pad Channels, Approx. 4-1/2' (1.38 m) Pad Spread

Cat. No. PCFT2SA7: For Two Pad Channels, Approx. 7' (2.14 m) Pad Spread Interchangeable Arms (Pad spread can be changed if optional arms are purchased.)

Cat. No. FA245: Optional Arms Convert PCFT2SA7 Lift Frame to PCFT2SA45 Lift Frame

Cat. No. FA27: Optional Arms Convert PCFT2SA45 Lift Frame to PCFT2SA7 Lift Frame

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.