• Big 10" (254 mm) Diameter Vacuum Pads
• 180 Degree Edgewise Rotation
• 90 Degree Tilt, Vertical to Flat
• Operates on 110 Volts AC
• Weekly Rental or Lease to Purchase Plans Available

Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. They may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.

Standard Pad Spread:
Cat. No. P211047DC: 51" x 84-1/4" (1.30 x 2.14 m)
Cat. No. P2HV11047DC: 50" x 83-1/4" (1.27 x 2.12 m)

Number/Size of Pads:
Cat. No. P211047DC: 8/11" (280 m) Diameter Lipped
Cat. No. P2HV11047DC: 8/10" (254 mm) Diameter Lipped

Load Capacity:
Cat. No. P211047DC: 1,400 Lbs. (635 kg)
Cat. No. P2HV11047DC: 1,200 Lbs. (545 kg)
(On smooth, non-porous surfaces. Call for recommendations on other surfaces.)

Average Unit Weight: 184 Lbs. (84 kg)

Standard Operating Power:
12V DC, 8 AMP (for each Pad Channel).

Load Movement: Manual rotation, 180 degree edgewise, with locking in three positions. Manual tilt, 90 degree between upright and flat, with automatic latching in upright position. (Units can be tilted ONLY when the lift bar is locked in the center position, as shown in drawings.)

Standard Features:
On-board Battery and Charger
Battery Energy Gauge
Low Vacuum Warning Light
Vacuum Gauge
Vacuum Line Filter
Vacuum Reserve Tank