text.skipToContent text.skipToNavigation
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : NA
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Brass Top Door Patch Fitting with 1NT303 Insert
CRL Brass Top Door Patch Fitting with 1NT303 Insert
Quantity Standard Price Sale Price Your Price
CRL Brass Top Door Patch Fitting with 1NT303 Insert Stock
Los Angeles, California 249
Dallas, Texas 3
Chicago (Elgin), Illinois 6
San Francisco/Oakland (Union City), California 6/27/2024
Atlanta, Georgia 6
New York Area (Secaucus, New Jersey) 24
Boston (Taunton), Massachusetts 6/28/2024
Orlando, Florida 7/2/2024
Denver, Colorado 7/2/2024
Seattle (Kent), Washington 7/2/2024
Cleveland (Solon), Ohio 7/1/2024
Philadelphia Area (Moorestown, New Jersey) 6/28/2024
Phoenix, Arizona 10
Las Vegas, Nevada 6/27/2024
Houston, Texas 8
Miami, Florida 2
San Diego, California 6/26/2024
Carolinas and Virginia, South Carolina 6
Product details
  • Finish/Color:
    Polished Brass
  • Glazing Thickness
    3/8 in., 1/2 in. (10 mm, 12 mm)
  • Height
    2 in. (51 mm)
  • Insert Type
  • Length
    6-7/16 in. (164 mm)
  • Maximum Door Height
    102 in. (2591 mm)
  • Maximum Panel Weight
    194 lbs. (88 kg)
  • Maximum Width
    42 in. (1067 mm)
  • Pivot Setback
  • Type
  • With Insert
Product Overview
  • For 3/8" or 1/2" (10 or 12 mm) Glass
  • With or Without Locks
  • 2-3/4" (70 mm) Pivot Setback
  • Use Monolithic Tempered Glass

CRL Top Gate Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate's glass panel, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template.

The following guidelines are to be used when making a door using this hardware:

Maximum Height: 102" (2.59 m)
Maximum Weight: 194 lbs. (88 kg)
Maximum Width: 42" (1.07 m)

If the door exceeds any of these limitations, full door rails should be used.

One 3/4" (19 mm) Diameter
Hole and Corner Notch


Template and Instructions

Do Not Use With:
PH42L, PH42R, PH43L or PH43R Transom Patch Fittings. They Require European Door Patch Fitting PH21A.

Product Warning:

These fittings are not for use with Laminated Glass.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings