text.skipToContent text.skipToNavigation

CRL 316 Brushed Stainless 48" Locking Ladder Pull

Finish/Color : Brushed Stainless Steel
Item #: LLPA48BS
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : Set

Shipping Weight : 13.0 Pounds
Shipping Limitations : UPS Oversize Rate
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL 316 Brushed Stainless 48" Locking Ladder Pull
CRL 316 Brushed Stainless 48" Locking Ladder Pull
Quantity Standard Price Sale Price Your Price
CRL 316 Brushed Stainless 48" Locking Ladder Pull Stock
Los Angeles, California 403
Dallas, Texas 5
Chicago (Elgin), Illinois 21
San Francisco/Oakland (Union City), California 8
Atlanta, Georgia 29
New York Area (Secaucus, New Jersey) 29
Boston (Taunton), Massachusetts 31
Orlando, Florida 9
Denver, Colorado 12
Seattle (Kent), Washington 19
Cleveland (Solon), Ohio 21
Philadelphia Area (Moorestown, New Jersey) 9
Phoenix, Arizona 7/25/2024
Las Vegas, Nevada 33
Houston, Texas 3
Miami, Florida 17
San Diego, California 7/24/2024
Carolinas and Virginia, South Carolina 32
Product details
  • Adaptor For 1 3/4 Inch Thick Doors
  • Diameter
    1-1/4 in. (32 mm)
  • Finish/Color:
    Brushed Stainless Steel
  • Glazing Thickness
    1/2 in. (12 mm), 3/4 in. (19 mm)
  • Material
    316 Stainless Steel
  • Mounting Points
  • Mounting Type
  • Overall Length
    48 in. (1219 mm)
Product Overview
  • A.D.A. Compatible Thumbturn
  • Locks Into the Floor Only
  • For 1/2" to 3/4" (12 to 19 mm) Glass
  • Adaptor Kits Available for Use on 1-3/4" (45 mm) Thick Doors - LLPA134ADT
  • Lock Operates at a Comfortable 42" (1.07 m) Above the Floor
  • 1-1/4" (32 mm) Diameter Alloy Available in 316 Brushed or Polished Stainless Steel Tubing
  • Custom Sizes Ship within One to Two Weeks
  • A.D.A. Compliant Models Available - Ask for a Quote Here

Our CRL LLPA Locking Ladder Pulls have a fully concealed deadbolt locking mechanism. No need to bend, simply turn a key or thumbturn located at a comfortable height above the finished floor to lock or unlock your doors. These Locking Ladder Pulls are intended for use with glass doors made from 1/2" to 3/4" (12 to 19 mm) thick tempered glass. They lock into the floor only, and are available in brushed and polished stainless steel.

This Locking Ladder Pull is supplied with our standard 7-pin Rim Cylinder with Interchangeable Core, that can be used as the final cylinder or as a temporary, and is easily replaced. If staying with the 7-pin format, just remove the core, have it re-keyed, or replace it with a new one. A selection of 7-pin Cores are available. If proprietary 6-pin Cylinders are required, simply remove the entire Rim Cylinder provided and replace with the proper Rim Cylinder of your choice. This Ladder Pull will accept most standard manufactured Rim type cylinders.

NOTE: Glass fabrication is required. Push/Pull Indicators in complementary finishes and Dustproof Keepers are sold separately.

Product Warning:

The Medico cylinder will not work with our standard LLPA Series Ladder Pulls. The pivot pin and cylinder spacer must be special ordered and modified by CRL.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Technical References & CAD Drawings