text.skipToContent text.skipToNavigation

CRL Polished Stainless Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass

Finish/Color : Polished Stainless Steel
Item #: Z910PS
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 12.16 Ounces
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Polished Stainless Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass
×
CRL Polished Stainless Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass
Quantity Standard Price Sale Price Your Price
CRL Polished Stainless Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 884
Dallas, Texas 3
Chicago (Elgin), Illinois 7
San Francisco/Oakland (Union City), California 12/12/2024
Atlanta, Georgia 3
New York Area (Secaucus, New Jersey) 55
Boston (Taunton), Massachusetts 12
Orlando, Florida 2
Denver, Colorado 1
Seattle (Kent), Washington 181
Cleveland (Solon), Ohio 12/16/2024
Philadelphia Area (Moorestown, New Jersey) 12/13/2024
Phoenix, Arizona 16
Las Vegas, Nevada 1
Houston, Texas 30
Miami, Florida 12/18/2024
San Diego, California 12/11/2024
Carolinas and Virginia, South Carolina 12/17/2024
Product details
  • Base Type
    Flat
  • Depth
    1-3/32 in. (28 mm)
  • Finish/Color:
    Polished Stainless Steel
  • Glazing Thickness
    3/8 in. (10 mm)
  • Height
    2-1/8 in. (54 mm)
  • Material
    Stainless Steel
  • Profile
    Square
  • Width
    2-1/8 in. (54 mm)
Product Overview
  • Designed to Accommodate Glass Thickness of 3/8" (10 mm)
  • Replacement Gaskets are Available by Ordering CRL Cat. No. Z38SG
  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support
  • Custom Painted Finishes Available Upon Request

This CRL Z-Series Square Type Flat Base Glass Clamp is designed to be used on glass thickness of 3/8" (10 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece.

NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS:
Glass Thicknesses: For 3/8” (10 mm).
Base Design: Flat.
For Use With: Square Tubing or Other Flat Surfaces.
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication:
For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support.
For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet.
Replacement Hardware: CRL P612 for Replacement Screws

Product Warning:

For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Technical References & CAD Drawings