text.skipToContent text.skipToNavigation

CRL Matte Black Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass

Finish/Color : Matte Black
Item #: Z910MBL
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 11.68 Ounces
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Matte Black Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass
×
CRL Matte Black Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass
Quantity Standard Price Sale Price Your Price
CRL Matte Black Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 3882
Dallas, Texas 233
Chicago (Elgin), Illinois 181
San Francisco/Oakland (Union City), California 125
Atlanta, Georgia 192
New York Area (Secaucus, New Jersey) 188
Boston (Taunton), Massachusetts 91
Orlando, Florida 47
Denver, Colorado 238
Seattle (Kent), Washington 106
Cleveland (Solon), Ohio 128
Philadelphia Area (Moorestown, New Jersey) 38
Phoenix, Arizona 51
Las Vegas, Nevada 151
Houston, Texas 118
Miami, Florida 383
San Diego, California 12/9/2024
Carolinas and Virginia, South Carolina 40
Product details
  • Base Type
    Flat
  • Depth
    1-3/32 in. (28 mm)
  • Finish/Color:
    Matte Black
  • Glazing Thickness
    3/8 in. (10 mm)
  • Height
    2-1/8 in. (54 mm)
  • Material
    Stainless Steel
  • Profile
    Square
  • Width
    2-1/8 in. (54 mm)
Product Overview
  • Designed to Accommodate Glass Thickness of 3/8" (10 mm)
  • Replacement Gaskets are Available by Ordering CRL Cat. No. Z38SG
  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support
  • Custom Painted Finishes Available Upon Request

This CRL Z-Series Square Type Flat Base Glass Clamp is designed to be used on glass thickness of 3/8" (10 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece.

NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS:
Glass Thicknesses: For 3/8” (10 mm).
Base Design: Flat.
For Use With: Square Tubing or Other Flat Surfaces.
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication:
For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support.
For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet.
Replacement Hardware: CRL P612 for Replacement Screws

Product Warning:

For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings