text.skipToContent text.skipToNavigation

CRL Brushed Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 1/2" Glass

Finish/Color : Brushed Stainless Steel
Item #: Z712BS
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 13.92 Ounces
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Brushed Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 1/2" Glass
×
CRL Brushed Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 1/2" Glass
Quantity Standard Price Sale Price Your Price
CRL Brushed Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 1/2" Glass Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 885
Dallas, Texas 95
Chicago (Elgin), Illinois 75
San Francisco/Oakland (Union City), California 80
Atlanta, Georgia 197
New York Area (Secaucus, New Jersey) 173
Boston (Taunton), Massachusetts 77
Orlando, Florida 32
Denver, Colorado 199
Seattle (Kent), Washington 12/10/2024
Cleveland (Solon), Ohio 12
Philadelphia Area (Moorestown, New Jersey) 14
Phoenix, Arizona 8
Las Vegas, Nevada 8
Houston, Texas 237
Miami, Florida 31
San Diego, California 140
Carolinas and Virginia, South Carolina 12/10/2024
Product details
  • Base Type
    Radius
  • Depth
    1-7/32 in. (31 mm)
  • Finish/Color:
    Brushed Stainless Steel
  • Glazing Thickness
    1/2 in. (13 mm)
  • Height
    2-17/32 in. (64 mm)
  • Material
    Stainless Steel
  • Width
    2-1/8 in. (54 mm)
Product Overview
  • For 1/2" (12 mm) Glass
  • Replacement Gaskets are Available by Ordering Cat. No. Z12SG
  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support
  • Custom Painted Finishes Available Upon Request

This CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 1/2" (12 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece.

NOTE: 9/16" (13.52 mm) Notch is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS:
Glass Thicknesses:For 1/2" (12 mm).
Base Design: Radius
For Use With: 2" (51 mm) Diameter Round Tubing
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication:
  • For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using steel pin (included) for glass support.
  • For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using steel pin (included) for glass support. Includes: Rubber Gaskets and Steel Pin (for Optional Use) with Grommet
    Replacement Hardware: CRL P612 for Replacement Screws & Replacement gaskets are available by ordering CRL Cat. No. Z14SG.

    Product Warning:

    For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

    Stainless Steel Advisory:
    Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
  • Technical References & CAD Drawings