text.skipToContent text.skipToNavigation
The Los Angeles Service Center will be closed on Saturday, March 30th in observance of Easter.

CRL 1/4" x 1/4" Saint-Gobain/Norton V2100 Thermalbond® Structural Glazing Spacer Tape

Finish/Color : Black
Black
Item #: V210814
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : Roll

Shipping Weight : 11.04 Ounces
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL 1/4" x 1/4" Saint-Gobain/Norton V2100 Thermalbond® Structural Glazing Spacer Tape
×
CRL 1/4" x 1/4" Saint-Gobain/Norton V2100 Thermalbond® Structural Glazing Spacer Tape
Quantity Standard Price Sale Price Your Price
CRL 1/4" x 1/4" Saint-Gobain/Norton V2100 Thermalbond® Structural Glazing Spacer Tape Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 822
Dallas, Texas 87
Chicago (Elgin), Illinois 37
San Francisco/Oakland (Union City), California 4/4/2024
Atlanta, Georgia 144
New York Area (Secaucus, New Jersey) 100
Boston (Taunton), Massachusetts 55
Orlando, Florida 61
Denver, Colorado 74
Seattle (Kent), Washington 39
Cleveland (Solon), Ohio 4/5/2024
Philadelphia Area (Moorestown, New Jersey) 40
Phoenix, Arizona 35
Las Vegas, Nevada 40
Houston, Texas 54
Miami, Florida 62
San Diego, California 4/3/2024
Carolinas and Virginia, South Carolina 38
Product details
  • Brand
    Norton
  • Case Quantity
    40 Rolls
  • Finish/Color:
    Black
  • Roll Length
    50 ft.(15 m)
  • Thickness
    1/4 in. (6 mm)
  • Type
    Foam
  • Width
    1/4 in. (6 mm)
Product Overview
  • Structural Glazing Spacer for Field and Shop Glazing
  • Superb Spacer for Two and Four Sided Structural Silicone Glazing Systems
  • Chemically Compatible with All Silicones Tested
  • Black Color

CRL Saint-Gobain/Norton V2100 Thermalbond® Tape is a semi-rigid foam tape with an aggressive pressure-sensitive adhesive. This high density tape has a specially formulated cellular substrate, and is used as a spacer for joint dimension control in structural silicone glazing systems. It is the most widely used spacer tape for structural silicone systems.

V2100 has proven to be compatible with all commercial silicone sealants used for structural glazing. It has a highly aggressive adhesive on both sides, and a semi-rigid, open cell structure that maintains the required spacing, and allows air and moisture to reach the silicone to allow optimum curing. Its low conductivity reduces heat transfer and inhibits condensation on windows, doors, and metal systems.

V2100 Tape is designed as a spacer for glass, metal, stone, mineral cement, and plastic panels in structural silicone glazing systems. This includes: two and four sided structural silicone glazing of curtain walls, storefronts, skylights and windows; to temporarily secure glazing or panels to framework in shop fabrication of unitized structural silicone glazing and cladding systems; to temporarily secure lightweight veneers to substrates while permanent structural silicone adhesives are curing; as a thermal break to reduce the conduction of heat; to provide an even sight line in vision areas. It is stocked only in an architectural black finish (other colors available on special order), and in nine stock sizes. Other sizes are also available on special order.

Limitations
NOTE: Thermalbond® V2100 is a SPACER material and not intended to be a structural component. The adhesive properties cannot be used as part of the permanent fastening system or in any way to reduce the amount of silicone adhesive recommended by the silicone manufacturer. Contact surfaces must be thoroughly cleaned. Position V2100 carefully, as it cannot be repositioned after initial contact. With some surfaces, it may be necessary to prime the surface with Norton Tite-R-Bond Adhesion Promoter.

Typical Properties
Density: 31 lbs./cu.ft. (497 kg/m³); Hardness: 35 durometer Shore A; Force to Compress 10%: 31 psi (214 (kPa); Tensile Strength: 180 psi (1241 kPa); Elongation: 125%; Temperature Range: Application 60°F (16°C) to 125°F (52°C); Service -40°F (-40°C) to 180°F (82°C).

Product Warning:

Limitations: NOTE: Thermalbond® V2100 is a SPACER material and not intended to be a structural component. The adhesive properties cannot be used as part of the permanent fastening system or in any way to reduce the amount of silicone adhesive recommended by the silicone manufacturer. Contact surfaces must be thoroughly cleaned. Position V2100 carefully, as it cannot be repositioned after initial contact. With some surfaces, it may be necessary to prime the surface with Norton Tite-R-Bond Adhesion Promoter.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings
Safety Data Sheets