CRL Translucent Clear 33S Silicone Sealant
|Quantity||Standard Price||Sale Price||Your Price|
Cartridge Contents (Ounces)10.3
Shelf Life (Months)24
- Our Most Popular Sealant
- Plastic Cartridges with Screw-On Nozzles
- Available in Eight Colors
- 24 Month Shelf Life*
- 10 Year Limited Warranty
This is our most popular sealant! CRL 33S Silicone is a high quality sealant that delivers the performance you demand at a competitive price. It is a one component, room temperature curing, acetic cure, 100% silicone elastomer that does not require the addition of activators, stabilizers, or catalysts to achieve optimum performance.
Basic Uses - CRL 33S Silicone is especially designed for joining and sealing most non-porous building materials including a variety of structural materials: glass, aluminum, metal alloys, stainless steel, wood, and plastics. All surfaces must be properly cleaned and the sealant tooled for good adhesion. Cat. No. S1L2100 Primer may be required for these and other substrates as well.
It has a wide operating temperature range of -80° to 400°F (-62° to 204°C), and can be applied at outdoor temperatures as low as -35° to 140°F (-37° to 60°C). 33S exhibits strong physical properties: 350 psi Tensile Strength; 120 psi Lap Shear at 1/8" (3 mm) thickness and Tear Strength of 25 ppi. It will seal curtainwall joints, steel and aluminum windows, and skylights. Indoor uses include bathtubs, showers, and sanitary installations (mildew resistant clear, white, translucent white, and tan contain a fungicide for cured beads that are mildew resistant).
Available in Custom Colors. Minimum order quantity is 30 cartridges and for any quantity ordered there is a plus or minus of approximately 10-25% that will be produced and shipped since custom colors are made by the batch. Lead time is 3 to 5 weeks.
Limitations - It is not recommended for structural glazing or insulating glass glazing, concrete and stone expansion joints, horizontal decks, patios, driveway or terrace joints where abrasion is possible. Not recommended for use on concrete, marble, limestone, lead coated surfaces, submerged joints (swimming pools and aquariums), plazas, decks, pavements, etc. Not suitable for painting. Check cartridge label and Specification Data Sheet for additional limitations.
Comparable Sealants - Dow Corning®: 999-A; 786; 732; 700; Glazing Silicone; General Purpose; Commercial Grade 100%; Tub, Tile and Ceramic, HVAC/R.Dap: 100% Silicone.GE®: 1200 Construction, 1000 Contractors, 1700 Sanitary. Tremco®: Proglaze, Tremsil 200, TremPro 644. OSI: HM-270. Pecora: 860, 863. Sika®: SikaSil® GP. Sonneborn: OmniPlus.
Technical Data - Meets or Exceeds Federal Specifications:
TT-S-001543A (COM-NBS) Class A, for Silicone Building Sealants
TT-S-00230C (COM-NBS) Class A, for One-Component Building Sealants
ASTM C-920 for Elastomer Joint Sealants, Type S, Grade NS, Class 25, Use NT, G, A
CAN/CGSB 19.13-M87. CRL 33S Meets the Requirements of FDA Regulation Number 21 CFR 177.2600 for Use in Food-Related Applications, Such as Walk-in Freezers and Refrigerated Trucks. CRL 33S is Certified by NSF to Standard 51 - Plastic Materials and Components Used in Food Equipment. CRL 33S is a "UL Recognized Component." Meets California Air Resources Board 2003 Requirements for Volatile Organic Compound (VOC) Content. Qualifies for LEED® (Leadership in Energy and Environmental Design) Green Building Rating System Credit.
NOTE: Full cure time is 48 hours at 70F and 50% humidity.
Not recommended for structural glazing or insulating glass glazing, concrete and stone expansion joints, horizontal decks, patios, driveway or terrace joints where abrasion is possible. Not recommended for surfaces with special protective or cosmetic coatings such as mirrors, reflective glass, polyethylene or polypropylene surfaces. Not recommended for use on concrete, marble, limestone, lead coated surfaces, submerged joints (swimming pools), plazas, decks, pavements, etc. Remove all old sealant before applying new. Not suitable for painting. Check cartridge label and Specification Data Sheet for additional limitations.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.