text.skipToContent text.skipToNavigation

CRL Primer for Silicone Sealants

Item #: S1L2100
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 1.0 Pounds
Shipping Limitations : Hazardous Material - No Air Shipments
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Primer for Silicone Sealants
CRL Primer for Silicone Sealants
Quantity Standard Price Sale Price Your Price
CRL Primer for Silicone Sealants Stock
Los Angeles, California 59
Dallas, Texas 6/25/2024
Chicago (Elgin), Illinois 3
San Francisco/Oakland (Union City), California 6/27/2024
Atlanta, Georgia 5
New York Area (Secaucus, New Jersey) 2
Boston (Taunton), Massachusetts 2
Orlando, Florida 7/2/2024
Denver, Colorado 12
Seattle (Kent), Washington 1
Cleveland (Solon), Ohio 4
Philadelphia Area (Moorestown, New Jersey) 6/28/2024
Phoenix, Arizona 6/27/2024
Las Vegas, Nevada 6/27/2024
Houston, Texas 6/25/2024
Miami, Florida 6
San Diego, California 6/24/2024
Carolinas and Virginia, South Carolina 7/2/2024
Product details
  • Finish/Color:
  • Contents
    8 oz.(236.6 ml)
  • Shelf Life
    18 (unopened)
Product Overview
  • Can Be Applied to Smooth or Porous Substrates
  • Promotes Adhesion To Metal, Masonry, And Plastic

CRL S1L2100 Primer promotes adhesion of certain one-part CRL Silicone Sealants to a variety of construction materials such as coated glass, metal, stone, masonry, and plastics. A coverage rate of about 25 square feet (2.3 m) per container is recommended on rough or porous substrates. On smooth metal surfaces a coverage rate of 50 square feet (4.6 m2) per container is possible. Allow the primer to dry for 15 to 60 minutes depending on substrate and weather conditions, and apply the silicone sealant within 8 hours. Check Spec Data for complete application instructions.

Product Warning:

Containers should be kept tightly sealed when not in use. The prime coat hydrolyzes upon contact with atmospheric moisture, and prolonged exposure will reduce or destroy its effectiveness. Once hydrolyzed, indicated by a milky appearance, the material cannot be reclaimed, and will contaminate any untreated prime coat with which it is mixed.
A sealant adhesion mock-up is recommended to assure performance.
Check container label and Specification Data Sheet for additional limitations.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings