text.skipToContent text.skipToNavigation
The Los Angeles Service Center will be closed on Saturday, March 30th in observance of Easter.

CRL 2" DCD Series Straight Shank Electro-Formed Diamond Drill

Item #: DCD2
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 8.0 Ounces
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL 2" DCD Series Straight Shank Electro-Formed Diamond Drill
×
CRL 2" DCD Series Straight Shank Electro-Formed Diamond Drill
Quantity Standard Price Sale Price Your Price
CRL 2" DCD Series Straight Shank Electro-Formed Diamond Drill Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 6
Dallas, Texas 4/5/2024
Chicago (Elgin), Illinois 4/5/2024
San Francisco/Oakland (Union City), California 4/4/2024
Atlanta, Georgia 4/8/2024
New York Area (Secaucus, New Jersey) 4/8/2024
Boston (Taunton), Massachusetts 1
Orlando, Florida 4/9/2024
Denver, Colorado 4/9/2024
Seattle (Kent), Washington 4/9/2024
Cleveland (Solon), Ohio 4/5/2024
Philadelphia Area (Moorestown, New Jersey) 4/5/2024
Phoenix, Arizona 4/4/2024
Las Vegas, Nevada 4/4/2024
Houston, Texas 4/5/2024
Miami, Florida 4/9/2024
San Diego, California 4/3/2024
Carolinas and Virginia, South Carolina 4/9/2024
Product details
  • Diameter
    2 in. (51 mm)
  • For Use On
    Flat (Plate) Glass ONLY
  • Shaft Size
    3/8 in. X 1-3/8 in. (10 mm X 35 mm)
  • Shank Diameter
    3/8 in. (10 mm)
  • Shank Type
    Reduced Round
  • Style
    DCD Series
Product Overview
  • For Fast Cutting, High Production Runs
  • Extended Work Life
  • Two Mounting Styles to Choose From: Straight Shank or Belgian Type
  • DCD Feature 3/8" x 1-3/8" (9.5 x 35 mm) Shaft

CRL DCD and HBT Series Electro-Formed Diamond Drills have a thin wall with a 1/2" (12.7 mm) deep multi-layer of diamonds and bonding matrix. These drills are designed for high speed, high production drilling, and produce outstanding results when exacting conditions are met.

Due to the fragile nature of these types of drills, they should be used in a precision machine, never allowing too much pressure to be applied. It is important to handle these types of diamond drills with care and use on flat surfaces only. Sharpening or "dressing" of these drills before each use will substantially increase their cutting capabilities. A dressing stone is a recommended necessity when working with an Electro-Formed Diamond Drill.

IMPORTANT NOTE:CRL DCD and HBT Series Diamond Drills have a very thin wall which makes them EXTREMELY FRAGILE. They are intended for the drilling of flat (plate) glass ONLY, in a true running, production type drilling press.

NEVER perform any type of freehand drilling. The use of a hand drill requieres a stabilization base such as a our GDB1 & GDB2 Glass Drilling Bases. Extreme care and caution should be used as the use of these drill in any other manner other than as specified may damage the bit and void warranty.

Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings