• More Holding Power
• Works in 3/8", 1/2" or 5/8" (10, 13 or 16 mm) Thick Drywall
• Audible "Pop" Indicates Correct Install

CRL Toggler® SnapSkru® Self-Drilling Anchors are designed to preserve drywall integrity at installation as well as when the item and screw are removed. These Anchors work with a range of screw sizes – MINI: #6 (recommended) to #8, and Regular: #6 to #10, #8 (recommended). Screws can be backed out and changed if needed without the Anchor coming out of the wall!

When activated with the minimum proper length screw: 1-1/4" (32 mm) for MINI and 1-1/2" (38 mm) for Regular, the Anchors open with an audible "pop", locking them in place in the wall or ceiling. They are easily installed with No. 2 Phillips screwdriver or bit, and resist vibration and shock. Maximum fixture thickness: 1/2" (13 mm) for MINI with 1-1/4" (32 mm) screw, and 3/4" (19 mm) for Regular with 1-1/2" (38 mm) screw. For thicker fixtures use longer screws.


HOLDING VALUES (ULTIMATE LOADS) - TENSILE (PULLOUT):

Anchor	Wallboard Thickness 3/8” (10 mm)	Wallboard Thickness 1/2” (13 mm)	Wallboard Thickness 5/8” (16 mm)
SnapSkru® MINI	57 Lbs. (25.8 kg)	65 Lbs. (29.5 kg)	95 Lbs. (43 kg)
SnapSkru® Regular	57 Lbs. (25.8 kg)	79 Lbs. (35.8 kg)	135 Lbs. (61.2 kg)

Holding values are per anchor with #6 x 1-1/4" screw for MINI and #8 x 1-1/2" screw for Regular. Industry standard safe holding = 1/4 of ultimate load.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.