• Built-In 24" (610 mm) Glass Rest and Roller Platen
• Heavy-Gauge Steel Welded Frame
• Conveniently Converted from 220 to 440 Volts
• Available for Purchase or Lease

Our CRL Heavy-Duty 4" x 132" (102 mm x 3.35 m) Upright Wet Abrasive Belt Sander is designed for continuous grinding, smoothing, and polishing of glass edges. It is similar in design to the 106" Model, but has larger diameter pulleys, and is twice the weight because of its heavy, reinforced construction.

You will be pleased with the superior performance of our 4" x 132" (102 mm x 3.35 m) Upright Wet Abrasive Belt Sander, and the years of dependable service it will give you. F.O.B. Local CRL service center. Must ship common carrier.

CAUTION: When grinding, always wear protective safety glasses and an approved glass dust respirator. One of each is provided with the machine.

ABRASIVE BELTS: These machines use standard 4" x 132" (102 x 3.35 m) abrasive belts. One 120 grit belt, one pair of safety glasses, and one approved respirator are furnished with each machine. A safety shield is mounted to the hood.

MOTOR AND STARTER: A 1 HP, 3450 RPM motor, with V-Belt drive, provides all the power for normal usage. The motor is three phase, 60 Hz, 220 or 440 Volts. It is wired to a manual push button starter. Please specify power requirements.

PULLEYS: Both pulleys are 8" (203 mm) diameter, and made of machined and balanced cast iron.

BELT TENSION DEVICE: Eccentric type with locking handle and control knob for tracking the belt.

BEARINGS: Standard ball bearings are used throughout the drive system.

COOLANT SYSTEM: A water supply line with an electrical solenoid control valve and a low water consumption spray nozzle (3.5 gph @ 30 psi) are included for wet grinding.

Product Warning:

CAUTION: When grinding, always wear protective safety glasses and an approved glass dust respirator. One of each is provided with the machine.