text.skipToContent text.skipToNavigation

CRL TPC Surface Protector Towelettes

Item #: TPC16P
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : Pack

Shipping Weight : 3.68 Ounces
Shipping Limitations : Hazardous Material - No Air Shipments
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL TPC Surface Protector Towelettes
×
CRL TPC Surface Protector Towelettes
Quantity Standard Price Sale Price Your Price
CRL TPC Surface Protector Towelettes Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 180
Dallas, Texas 6/21/2024
Chicago (Elgin), Illinois 1
San Francisco/Oakland (Union City), California 6/20/2024
Atlanta, Georgia 26
New York Area (Secaucus, New Jersey) 6/24/2024
Boston (Taunton), Massachusetts 6/21/2024
Orlando, Florida 6/25/2024
Denver, Colorado 6/25/2024
Seattle (Kent), Washington 6/25/2024
Cleveland (Solon), Ohio 6/24/2024
Philadelphia Area (Moorestown, New Jersey) 6/21/2024
Phoenix, Arizona 6/20/2024
Las Vegas, Nevada 6/20/2024
Houston, Texas 6/21/2024
Miami, Florida 6/25/2024
San Diego, California 6/19/2024
Carolinas and Virginia, South Carolina 6/25/2024
Product details
  • Brand
    CRL
Product Overview
  • Transparent Polymer Coating
  • Water, Soil, and Stain Repellant
  • Protects Glass and Many Other Surfaces

CRL TPC Surface Protector will actually seal the pores of glass, porcelain, ceramic, plastics, polished metals, fiberglass, and marble to make the surface water, soil, and stain resistant. The clear coating guards against the adhesion and build-up of dirt, grime, mold, mildew, rust and mineral deposits. Environmentally friendly and non-toxic, CRL TPC Surface Protector permits the practice of preventive maintenance, reducing costly cleaning, repairs and replacement. Simply spray on and polish off. 1 Fl. oz. (29 ml) of TPC Surface Protector protects approximately 15 sq. ft. (1.4 meters square) of glass. Also available in 55 gl. (208 l) drums on special order.

Product Warning:

Check label and Material Safety Data Sheet for any additional limitations and warnings.

PROCEDURE FOR THE EFFECTIVE TREATMENT OF SAND-BLASTED GLASS

1. Due to the variable nature of the sandblasting process (i.e. different grit size and blasting pressure resulting in variable depth, etching configuration and amount of residual glass particles), before treatment with CRL TPC SURFACE PROTECTOR, sandblasted glass must be thoroughly washed and dried.

2. The CRL SURFACE PROTECTOR must be applied using a strong, padded cloth and a firm, circular and overlapping motion. The product should be allowed to dry (haze) and then it should be reapplied to ensure complete coverage.

3. When the surface is dry (i.e., the final "haze" has formed), the surface should be sprayed with plain water to test for uniform water beading. When the applicator is satisfied that the "beading" is uniform, the surface should then be washed with a mild detergent solution or an alcohol and water solution to remove all excess polymer (this "excess" is what sometimes looks like "stains" and makes the surface look darker in spots). Finally, the surface should be dried.

THIS PROCESS WILL YIELD A PERFECTLY UNIFORM, WELL-TREATED SURFACE THAT WILL TYPICALLY LAST FOR YEARS UNDER ORDINARY USE.

While this appears to be a complicated procedure, it really is not. Most people who treat sandblasted glass in this manner ultimately agree that it is really quite simple once you get used to the process.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings