text.skipToContent text.skipToNavigation
  1. Home
  2. All Products
  3. Glass Entrance & Interior Systems
  4. Patch Fitting Glass Door Systems
  5. Patch Fitting Closers
  6. CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - NHO
More Choices
Share PrintPrint

CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - NHO

Finish/Color : Brushed Stainless Steel
Satin Anodized
Brushed Stainless Steel
Matte Black
Polished Stainless Steel
Item #: CRL380BS
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each
Where to buy

View Technical References
Shipping Weight : 3.456 Ounces
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - NHO
×
CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - NHO
Quantity Standard Price Sale Price Your Price
CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - NHO Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 112
Dallas, Texas 15
Chicago (Elgin), Illinois 10
San Francisco/Oakland (Union City), California 9
Atlanta, Georgia 12
New York Area (Secaucus, New Jersey) 26
Boston (Taunton), Massachusetts 14
Orlando, Florida 1
Denver, Colorado 4
Seattle (Kent), Washington 1
Cleveland (Solon), Ohio 4
Philadelphia Area (Moorestown, New Jersey) 30
Phoenix, Arizona 28
Las Vegas, Nevada 18
Houston, Texas 2
Miami, Florida 14
San Diego, California 2
Carolinas and Virginia, South Carolina 5
Related Products
Product details
  • Finish/Color:
    Brushed Stainless Steel
  • Glazing Thickness
    3/8 in., 1/2 in. (10 mm, 12 mm)
  • Height
    2-3/4 in. (70 mm)
  • Hold Open
    No
  • Maximum Door Width
    39 in. (991 mm)
  • Maximum Panel Weight
    220 lbs. (99.8 kg)
  • Pivot Setback
    2-9/16
  • Width
    1-5/8 in. (41 mm)
Product Overview
  • 2-9/16" (65 mm) Pivot Point
  • Available in Brushed and Polished Stainless, Satin Anodized, and Matte Black Finishes
  • Accommodates 3/8" to 1/2" (10 to 12 mm) Tempered Glass
  • Flush Mount - No Hole Required in the Floor
  • For Interior Use Only
  • Must be used with PH21A top patches

CRL380 Series Hydraulic Patch Fittings are medium duty for interior use. There are two adjustment screws to adjust the latching speed and the swing speed. The Hydraulic Patch Fitting is designed for installation without the need for any other floor or overhead closing devices. Maximum door width is 39" (1 m) and maximum weight is 220 lbs (100kg). Fitting can accommodate 3/8" (10 mm), and 1/2" (12 mm) tempered glass. Glass fabrication (cut-out) is required.

Product Warning:

Custom headers with 2-9/16" [65 mm] pivot points must be ordered if needed. These fittings are not compatible with the stock NH36xx and NH72xx.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Technical References & CAD Drawings
Installation Instructions
CRL 380 Hydraulic Patch Hinge Installation Instructions
Cleaning & Maintenance
CRL Stainless Steel Disclaimer

Have Questions? We Can Help.

If you have questions or need assistance, we're here to help.
Customer Service: 1.800.421.6144
Contact CRL Customer Service