text.skipToContent text.skipToNavigation
  1. Home
  2. All Products
  3. Glass Entrance & Interior Systems
  4. Patch Fitting Glass Door Systems
  5. Patch Fitting Closers
  6. CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model
More Choices
Share PrintPrint

CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model

Finish/Color : Brushed Stainless Steel
Satin Anodized
Brushed Stainless Steel
Matte Black
Polished Stainless Steel
Item #: CRL380HBS
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each
Where to buy

View Technical References
Shipping Weight : 2.16 Pounds
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model
×
CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model
Quantity Standard Price Sale Price Your Price
CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 973
Dallas, Texas 18
Chicago (Elgin), Illinois 16
San Francisco/Oakland (Union City), California 13
Atlanta, Georgia 7
New York Area (Secaucus, New Jersey) 95
Boston (Taunton), Massachusetts 14
Orlando, Florida 13
Denver, Colorado 17
Seattle (Kent), Washington 9
Cleveland (Solon), Ohio 38
Philadelphia Area (Moorestown, New Jersey) 12
Phoenix, Arizona 13
Las Vegas, Nevada 20
Houston, Texas 11
Miami, Florida 29
San Diego, California 6
Carolinas and Virginia, South Carolina 58
Related Products
Product details
  • Finish/Color:
    Brushed Stainless Steel
  • Glazing Thickness
    3/8 in., 1/2 in. (10 mm, 12 mm)
  • Height
    2-3/4 in. (70 mm)
  • Hold Open
    Yes
  • Length
    7-3/16 in. (183 mm)
  • Maximum Door Width
    39 in. (991 mm)
  • Maximum Panel Weight
    220 lbs. (99.8 kg)
  • Pivot Setback
    2-9/16
  • Width
    1-5/8 in. (41 mm)
Product Overview
  • 2-9/16" (65 mm) Pivot Point
  • Available in Brushed and Polished Stainless, Satin Anodized, and Matte Black Finishes
  • Accommodates 3/8" to 1/2" (10 to 12 mm) Tempered Glass
  • Flush Mount - No Hole Required in the Floor
  • For Interior Use Only
  • Must be used with PH21A top patches

CRL380 Series Hydraulic Patch Fittings are medium duty for interior use. There are two adjustment screws to adjust the latching speed and the swing speed. The Hydraulic Patch Fitting is designed for installation without the need for any other floor or overhead closing devices. Maximum door width is 39" (1 m) and maximum weight is 220 lbs (100kg). Fitting can accommodate 3/8" (10 mm), and 1/2" (12 mm) tempered glass. Glass fabrication (cut-out) is required.

Product Warning:

Custom headers with 2-9/16" [65 mm] pivot points must be ordered if needed. These fittings are not compatible with the stock NH36xx and NH72xx.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Technical References & CAD Drawings
Installation Instructions
CRL 380 Hydraulic Patch Hinge Installation Instructions
Cleaning & Maintenance
CRL Stainless Steel Disclaimer

Have Questions? We Can Help.

If you have questions or need assistance, we're here to help.
Customer Service: 1.800.421.6144
Contact CRL Customer Service