text.skipToContent text.skipToNavigation

CRL Polished Stainless European Top Door Patch Fitting with 1NT304 Insert

Finish/Color : Polished Stainless Steel
Item #: PH21BPS
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : NA
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Polished Stainless European Top Door Patch Fitting with 1NT304 Insert
×
CRL Polished Stainless European Top Door Patch Fitting with 1NT304 Insert
Quantity Standard Price Sale Price Your Price
CRL Polished Stainless European Top Door Patch Fitting with 1NT304 Insert Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 58
Dallas, Texas 8
Chicago (Elgin), Illinois 12/13/2024
San Francisco/Oakland (Union City), California 11
Atlanta, Georgia 12/10/2024
New York Area (Secaucus, New Jersey) 16
Boston (Taunton), Massachusetts 2
Orlando, Florida 2
Denver, Colorado 12/10/2024
Seattle (Kent), Washington 4
Cleveland (Solon), Ohio 4
Philadelphia Area (Moorestown, New Jersey) 12/13/2024
Phoenix, Arizona 12/12/2024
Las Vegas, Nevada 12/13/2024
Houston, Texas 3
Miami, Florida 34
San Diego, California 12/11/2024
Carolinas and Virginia, South Carolina 12/17/2024
Product details
  • Finish/Color:
    Polished Stainless Steel
  • Glazing Thickness
    3/8 in., 1/2 in. (10 mm, 12 mm)
  • Height
    2 in. (51 mm)
  • Insert Type
    1NT304
  • Length
    6-7/16 in. (164 mm)
  • Pivot Setback
    2-9/16
  • Series
    European
  • Type
    Top
  • With Insert
    Yes
Product Overview
  • European 2-9/16" (65 mm) Pivot Setback
  • High Density Cast Body
  • Gaskets for use with 3/8" or 1/2" (10 or 12 mm) Glass

The CRL Top Door Patch Fitting includes the 1NT304 Insert for use with our Overhead Concealed Door Closers that have a 9/16" (14 mm) square and 3/4" (19 mm) long spindle. Finished covers are available in four standard finishes. Gaskets are supplied that allow this Patch Fitting to be used with either 3/8" or 1/2" (10 or 12 mm) Glass.

Glass Fabrication Required: One 3/4" (19 mm) diameter hole and corner notch.

Product Warning:

These fittings are not for use with Laminated Glass.

The following guidelines are to be used when making a 1/2" glass door using this hardware:

Maximum Height: 102" (2.59 m)
Maximum Weight: 194 Lbs. (80 kg)
Maximum Width: 42" (1.09 m)

If the door exceeds any of these limitations, full door rails should be used.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Technical References & CAD Drawings