CRL Tremco® .120" Wedge Gasket Glazing Spline
|Quantity||Standard Price||Sale Price||Your Price|
|Branch Location||STOCK AVAILABILITY|
|Los Angeles, California||11|
|Chicago (Elgin), Illinois||10/6/2023|
|San Francisco/Oakland (Union City), California||10/5/2023|
|New York Area (Secaucus, New Jersey)||10/3/2023|
|Boston (Taunton), Massachusetts||10/9/2023|
|Seattle (Kent), Washington||10/10/2023|
|Cleveland (Solon), Ohio||10/9/2023|
|Philadelphia Area (Moorestown, New Jersey)||10/9/2023|
|Las Vegas, Nevada||1|
|San Diego, California||10/4/2023|
|Carolinas and Virginia, South Carolina||10/10/2023|
Face Clearance0.120 in. (3 mm)
Feet Per Roll500 ft. (152.4 m)
Metal Requirements0.062 in. X 0.09 in. Metal Nib (1.5 mm X 2 mm Metal Nib)
- Used in Compression Glazing Systems with Tremco® POLYshim II Glazing Tape
- 70 Durometer Extruded EPDM
This CRL Tremco® Wedge Gasket Glazing Spline profile is made of extruded 70 durometer dense EPDM. The wedge profile is designed for use in compression glazing systems with Tremco® POLYshim II Glazing Tapes. Glazing Spline profiles require a .090" x .062" (2.3 x 1.6 mm) metal nib for proper engagement.
Special Requirements: A mock-up is recommended by Tremco® to verify acceptable mating between both the Glazing Spline and the Metal Nib.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.