text.skipToContent text.skipToNavigation
The Los Angeles Service Center will be closed on Saturday, March 30th in observance of Easter.

CRL Diamond Style Spindle 8.5 Lb. Exterior 105º Hold Open Retrofit Overhead Concealed Closer Body Only

Item #: CRL7670
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 9.17 Pounds
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Diamond Style Spindle 8.5 Lb. Exterior 105º Hold Open Retrofit Overhead Concealed Closer Body Only
×
CRL Diamond Style Spindle 8.5 Lb. Exterior 105º Hold Open Retrofit Overhead Concealed Closer Body Only
Quantity Standard Price Sale Price Your Price
CRL Diamond Style Spindle 8.5 Lb. Exterior 105º Hold Open Retrofit Overhead Concealed Closer Body Only Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 4
Dallas, Texas 4/5/2024
Chicago (Elgin), Illinois 4/5/2024
San Francisco/Oakland (Union City), California 4/4/2024
Atlanta, Georgia 5
New York Area (Secaucus, New Jersey) 2
Boston (Taunton), Massachusetts 4/8/2024
Orlando, Florida 4/9/2024
Denver, Colorado 4/9/2024
Seattle (Kent), Washington 2
Cleveland (Solon), Ohio 4
Philadelphia Area (Moorestown, New Jersey) 2
Phoenix, Arizona 4/4/2024
Las Vegas, Nevada 4/4/2024
Houston, Texas 1
Miami, Florida 4/9/2024
San Diego, California 4
Carolinas and Virginia, South Carolina 4/9/2024
Product details
  • Americans with Disabilities Act
    Yes
  • Body Height
    1-11/16
  • Body Length
    11-5/8
  • Body Width
    3-11/16
  • Case Quantity
    6
  • Closer Type
    Overhead Concealed
  • Door Height
    96
  • Handing
    Double Acting
  • Hold Open
    105°
  • Includes
    CRL8010FS
  • Maximum Door Weight
    200
  • Maximum Door Width - Exterior
    36 Inches
  • Maximum Door Width - Interior
    36 Inches
  • Recommended Door Type
    Aluminum, Hollow Metal
  • Retrofit Closer
    Kawneer Husky
  • Spindle
    1/2
  • Spring Size
    8.5
  • UL Listed
    Yes
Product Overview
  • Spindle Set in the Diamond Position at 0º
  • Replace Existing Pre-1998 Original Kawneer® Husky® Closers
  • 5 Year Limited Warranty
  • UL Listed

This CRL Overhead Concealed Door Closer incorporates a spindle set in the diamond position, instead of a square position, at 0º. This enables door installers to replace existing pre-1998 Kawneer® original style Husky® Door Closers without the need to change the door arm, which requires a diamond pattern spindle engagement. With the addition of our Retrofit Clips for either 4" or 4-1/2" (102 or 114 mm) optional headers, the existing door closer can be replaced without the need to replace any additional door hardware. The existing Center-Hung or Offset Arms can be used, as well as the existing pivot.

These Overhead Concealed Door Closers are available in 105 degree Hold Open and No Hold Open styles, with Medium Spring Size, and an 8.5 lb. model for exterior door applications. A diamond pattern End-Load Center-Hung Replacement Arm, Cat. No. CRL8010H, is also available.

NOTE: May require considerable alterations to retrofit. Mounting Clips are sold separately and are required to mount Closer.

NOTE: An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.

Independent Adjustment Valves
Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.

Special Retaining Rings
Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.

NOTE: Although Series Door Closers comply with specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size.

Product Warning:

Closers set to comply with specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. This Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 36" (914 mm). Kawneer® is a registered trademark of Alcoa Inc., and its subsidiaries and affiliates.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings