text.skipToContent text.skipToNavigation

CRL Brushed Stainless 48" Extra Length Right Handed "S" Ladder Style Back-to-Back Pull

Finish/Color : Brushed Stainless Steel
Brushed Stainless Steel
Item #: 48SRPBS
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 7.937 Pounds
Shipping Limitations : UPS Oversize Rate
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL Brushed Stainless 48" Extra Length Right Handed "S" Ladder Style Back-to-Back Pull
×
CRL Brushed Stainless 48" Extra Length Right Handed "S" Ladder Style Back-to-Back Pull
Quantity Standard Price Sale Price Your Price
CRL Brushed Stainless 48" Extra Length Right Handed "S" Ladder Style Back-to-Back Pull Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 4
Dallas, Texas 12/10/2024
Chicago (Elgin), Illinois 12/13/2024
San Francisco/Oakland (Union City), California 12/12/2024
Atlanta, Georgia 12/10/2024
New York Area (Secaucus, New Jersey) 12/10/2024
Boston (Taunton), Massachusetts 12/10/2024
Orlando, Florida 12/17/2024
Denver, Colorado 12/10/2024
Seattle (Kent), Washington 12/17/2024
Cleveland (Solon), Ohio 12/16/2024
Philadelphia Area (Moorestown, New Jersey) 12/13/2024
Phoenix, Arizona 12/12/2024
Las Vegas, Nevada 12/13/2024
Houston, Texas 12/10/2024
Miami, Florida 12/18/2024
San Diego, California 12/11/2024
Carolinas and Virginia, South Carolina 12/17/2024
Product details
  • Diameter
    1-1/4 in. (32 mm)
  • Finish/Color:
    Brushed Stainless Steel
  • Glazing Thickness
    3/8 in. To 3/4 in. (10 mm To 19 mm)
  • Material
    Stainless Steel
  • Mounting Center To Center
    36 in. (914 mm)
  • Mounting Hole Diameter
    5/8 in. (16 mm)
  • Mounting Type
    Back-To-Back
  • Overall Length
    48 in. (1219 mm)
Product Overview
  • Three Sizes in Two Popular Finishes for 3/8" to 3/4" (10 to 19 mm) Glass
  • Designer Left and Right Hand Models Available
  • 1-1/4" (32 mm) Diameter Heavy Wall 304 Alloy Stainless Steel Tubing
  • Custom Finishes and Sizes Available

CRL "S" Style Ladder Pull Handles are for back-to-back mounting with supplied through-bolts. They are intended for use on doors made from 3/8" to 3/4" (10 to 19 mm) thick tempered glass. Stock sizes range from 24" to 48" (610 mm to 1.22 m) overall height. Standard finishes are polished stainless and brushed stainless. The Pulls are handed left and right to ensure the exposed set-screws are always on the interior side of the door. Handing is determined from the exterior side looking in.

Custom sizes and finishes are available to meet architectural specifications. For additional information or to begin the custom design process, contact our Technical Sales Department.

SPECIFICATIONS:
For Use With: 3/8" to 3/4" (10 to 19 mm) Glass
Construction: 1-1/4" (32 mm) Diameter Stainless Steel Tubing
Glass Fabrication Required: Two 5/8" (16 mm) Diameter Holes

Product Warning:

This handle is "handed" and the opposite handed pull will be needed for pairs of doors. For single sided Ladder Pulls, please contact our Technical Sales Department.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Technical References & CAD Drawings