C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: PP301HV

  • Primerless-to-Glass Formula

  • Excellent High Strength and Rapid Curing

  • Passes or Exceeds F.M.V.S.S. 212
  • Guide to Proper Installations
  • 10.1 Fl. Oz. Tubes

  • CRL 301HV Series Primerless-to-Glass High Viscosity Urethane is a high quality fast curing, High Viscosity, medium decking, non-conductive, and primerless-to-glass polyurethane adhesive that passes or exceeds the requirements of U.S. Federal Motor Vehicle Safety Standards 212. With over 1,000 psi of tensile strength and 200 psi lap shear at ultimate cure, PP301HV is one of the safest and strongest urethanes offered for the aftermarket. These urethanes have a new Aggressive Adhesion Formula and have proven themselves to aggressively bond to all automotive glass surfaces and frits without needing a glass primer. Long term exposure testing confirms that the new formula stands up to the harshest environmental conditions.

    CRL POWR 301HV Series Primerless-to-Glass High Viscosity Automotive Urethane


    Other Products/Finishes:

    PP301HV CRL POWR 301HV Series Primerless-to-Glass High Viscosity Automotive Urethane

    Catalog Number:PP301HV
    Also Available in These Catalogs:
    CRL43 Auto Glass Tools and Hardware, PAGE A112
    TV12A Truck & Van Accents 2011, PAGE AC45
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N484
    Tensile Strength:1000 psi
    Lap Shear Strength:600 psi
    Lynx Test:Click Here
    Ship Via:Hazardous Material - No Air Shipments
    Shipping Weight:1 lb (454g)
    Case Qty:24
    Minimum Order:24 Each

    Packaged with 15 V-Notch nozzles (Cat. No. 690001) and four cone-shaped nozzles (Cat. No. UN0Z) per case.

    We are also introducing additional support products for this new series of automotive Urethanes, including CRL POWR 300 Series Urethane EPDM/PVC Primer/UV Blocker PP3UV for bonding to encapsulated parts and moldings or adding a black-out band to glass without a frit to protect the bond line from ultraviolet light. CRL POWR 300 Series Urethane Pinchweld Primer PP3MP is for application prior to bonding to bare metal scratches and rust repaired or repainted pinchwelds. You should always use PWR22 CRL Automotive Glass Cleaner to clean the glass and the bonding area of the glass to remove any contamination. By using these products, the strongest possible bond will be attained. Complete detailed instructions are printed on every cartridge, and found on the Spec Data.

    PP301HV is packed 24-10.1 fl. oz. (300 mm) cartridges to a case. Full pallets contain 1440 total cartridges.

    POWR 300 Series Urethane should not be used with primers from other urethane systems. Do not store at temperatures in excess of 75°F (24°C). If product is mechanically warmed in excess 95°F (35°C) for a cold weather installation, then it must be used the same day. 9 Month Shelf Life. Aluminum cartridges have screw-on nozzles.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.