C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: 31M8215SN

  • For Self-Closing Glass Doors from 3/8" to 1/2" (10 to 12 mm) Thick

  • Aluminum Body in Your Choice of Three Finishes: Brite Chrome, Brushed Satin, and Satin Anodized

  • Hold Open or No Hold Open Models
  • Adjustable Closing Speed
  • A Great Alternative to Floor Closers and Patch Fittings

  • This CRL 180º Glass-to-Glass Hinge swings in and out a full 90º, with stop at 0º. Closing speed can be adjusted. For doors up to 39" (1 m) wide. Maximum weight per two hinges is 176 lbs. (80 kg).

    CRL Brushed Satin Nickel Vernon 180º Glass-to-Glass Hinge


    Other Products/Finishes:

    31M8215SN CRL Brushed Satin Nickel Vernon 180º Glass-to-Glass Hinge

    Catalog Number:31M8215SN
    Also Available in These Catalogs:
    CRL14D Door and Entrance Catalog, PAGE 155D
    CRL23R Frameless Shower Door and Mirror Hardware, PAGE 177J
    CRL63A Architectural Hardware Master, PAGE 356H
    CRL93A Architectural Hardware, PAGE CH144
    Closing Type:No Hold Open
    Ship Via:Can Ship UPS
    Minimum Order:1 Each

    The Vernon Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Designed for use on interior doors (not for Shower Doors) leading into the bathroom area, Vernon allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an 'all-glass' door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.

    Properly mounted, two Vernon Hinges will support a 3/8" to 1/2" (10 to 12 mm) thick glass door up to 39" (1 m) in width and weighing up to 176 lbs. (80 kg). (Do not use more than two hinges.) A control valve lets you adjust the hinge to the desired closing speed. The Vernon Hinge has an internal stop on the valve adjustment screw stopping you from going too far, so you can open completely (4-5 turns) until you reach the speed required. The Vernon works properly between 5° to 104° degrees without problems. The viscosity of the oil could change, hence you may need to adjust the speed to compensate. And Vernon is ambidextrous, giving you even more design freedom.

    The Vernon Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Vernon has been subject to strict testing (over 1 million cycles), assuring long lasting service.

    Glass Thickness Range: 3/8" to 1/2" (10 to 12 mm)
    Construction: Aluminum
    Hinge Swings: 90º Inwards and Outwards (Except 31M8060 Model, Which Only Swings One Way)
    Closing Type: Automatic Closing from 0º to 80º
    Cut-Out Required
    Includes: Snap-In Molded Gaskets for 3/8" (10 mm) and 1/2" (12 mm) Glass; Hex Screws Maximum Capacities Using Two Hinges: Door Width: 39" (1 m); Door Weight: 176 lbs. (80 kg)

    Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Technical Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.