C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN OFF

View Larger Image

Catalog Number: L56S10D

  • For 9/16" (13.52 mm) Laminated Tempered Glass (6 x 1.52 x 6 mm)
  • Drilled and Counter Bored 12" (305 mm) Center-to-Center, or We Will Custom Drill to Your Specifications
  • Typically Used as the Base Channel for Glass Railing Systems or Windscreens

  • Works with LTL96X TAPER-LOC® Taper Sets
  • Custom Cutting and Mitering Service Available
  • CRL Recommends Consulting with the Glass Fabricator Prior to Wet Setting Laminated Tempered Glass

  • The CRL L56S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.

    CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Holes Pattern "D"


    Other Products/Finishes:

    L56S10D CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Holes Pattern "D"
    L56S10D6 CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Holes Pattern "D" for 9/16" Laminated Tempered Glass

    Catalog Number:L56S10D
    Also Available in These Catalogs:
    CRL63R Architectural Railing Systems, PAGE 142R
    HR18 Architectural Railing Systems 2018, PAGE 163B
    CRL53R Glass & Glazing Catalog, PAGE 568G
    CRL63A Architectural Hardware Master, PAGE 594H
    CRL93G Glass and Glazing, PAGE GG206
    CRL93A Architectural Railings, PAGE HR032
    LP11 Commercial Door Handles Catalog, PAGE L238
    Stock Length:120" (3.05 m)
    Hole Size:9/16" (14.3 mm)
    Counter Bore x Depth
    Holes Drilled C.T.C. :
    7/8" (22.2 mm x 1/2" 12.7 mm)
    12" (305 mm)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:86 lb (39.01kg)

    For use with 9/16" (13.52 mm) Laminated Tempered Glass (6 mm x 1.52 mm x 6 mm)
    Thickness Range: 0.497" (12.62 mm) to 0.549" (13.94 mm)

    CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.