C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF


View Larger Image

Catalog Number: Z212BN
Finish: BRUSHED NICKEL


  • For 1/2" (12 mm) Glass

  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support
  • Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
  • Custom Painted Finishes Available Upon Request

  • Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4" up to 1/2" (6 to 12 mm), and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.



    CRL Brushed Nickel Z-Series Round Type Radius Base Zinc Clamp for 1/2" Glass


     


    Other Products/Finishes:

    CATALOG NUMBER DESCRIPTION COLOR
    Z212BN CRL Brushed Nickel Z-Series Round Type Radius Base Zinc Clamp for 1/2" Glass
    Z212BR CRL Brass Z-Series Round Type 2" Radius Base Zinc Clamp for 1/2" Glass
    Z212CH CRL Chrome Z-Series Round Type 2" Radius Base Zinc Clamp for 1/2" Glass
    Z212SC CRL Satin Chrome Z-Series Round Type 2" Radius Base Zinc Clamp for 1/2" Glass
    Z212W CRL White Z-Series Round Type 2" Radius Base Zinc Clamp for 1/2" Glass

    Catalog Number:Z212BN
    Also Available in These Catalogs:
    CRL63R Architectural Railing Systems, PAGE 270R
    CRL53R Glass & Glazing Catalog, PAGE 284G
    HR18 Architectural Railing Systems 2018, PAGE 306B
    SC18 Standoff and Clamp Hardware, PAGE 46SC
    CRL63A Architectural Hardware Master, PAGE 613H
    CRL93G Glass and Glazing, PAGE GG073
    CRL93A Architectural Railings, PAGE HR102
    Color:Brushed Nickel
    Width:2-17/32" (64.1 mm)
    Height:2-1/8" (54 mm)
    Tube Diameter:2" (51 mm)
    Ship Via:Can Ship UPS
    Shipping Weight:8 oz (227g)

    For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece.

    NOTE: 1/2" (12 mm) notch is required if using the steel pin (included with the clamp) for additional glass support. Replacement gaskets are available by ordering CRL Cat. No. Z14RG.

    SPECIFICATIONS:
    Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm)
    Base Design: Radius
    For Use With: 1-1/2" or 2" (38 or 50.8 mm) Diameter Round Tubing
    Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
    Glass Fabrication: For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) notch is required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
    Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet

    For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.