C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: 761

  • High Speed Beveling

  • 1/2" (12 mm) Bevels at 95" (2.4 m) Per Minute

  • 1/8" to 1" (3.2 to 25 mm) Glass Thickness Range
  • 3 HP Spindle Motors for High Speed/High Volume

  • This CRL Beveller Machine is ideally suited for fabricators who need to produce a large volume of bevels. Model 761 uses two bevel grind wheels to bevel glass up to 1" (25 mm) thick at speeds from 40% to 83% faster than Model 752 Beveller/Edger. It will produce 1/2" (12.7 mm) height bevels at 95" (2.4 m) per minute or 1" (25 mm) height bevels at 55" (1.4 m) per minute. Ground edgework can be done on glass up to 1/2" (12 mm) thick. Both models of Somaca/CRL's Seven Spindle Bevellers feature easy-to-use digital controls for selecting glass thickness, bevel height and bevel angle. Bevel calculation and set-up is accomplished in seconds. You also have the ability to store up to 15 different bevel settings, and recall them instantly. The computer controls are also able to determine a bevel angle based on the final edge thickness required. The operator can adjust the controls to read in inch or metric units of measure. This control will also track productivity - it records the total inches of glass processed and the corresponding hours of labor on user counters which can be reset. The bevel and edge spindles have individual ammeters to monitor wheel performance. The system's microprocessor and motor starters are located in a remote cabinet to minimize vibration to components.

    CRL 761 Series Seven Spindle Beveller


    Other Products/Finishes:

    761 CRL 761 Series Seven Spindle Beveller

    Catalog Number:761
    Also Available in These Catalogs:
    Width:24'-1" (7.3 m)
    Depth:8' (2.4 m)
    Height:8'-1" (2.46 m)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:8100 lb (3674.1kg)

    Wheel Stations: Featuring 3HP, 3600 rpm spindle assemblies for all beveling positions, and the edge grind position. The edge polish station on Model 752 uses a 2HP, 1800 rpm spindle assembly. All wheel adjustments are located on the front of the machine.

    Conveyor: The glass is conveyed by means of a flexible conveyor. Both entry and exit conveyors are 7' (2.1 m) long. Conveyor speed is variable from 0" to 157" (4 m) per minute by push button adjustment.

    Bevel size and angle: 0" to 2" (0 to 50.8 mm) height, 3 - 45 degrees.
    Bevel capacity: 1/8" to 1" (3 to 25 mm) thick glass.
    Edge capacity: 1/8" to 1/2" (3 to 12 mm) thick glass.
    Minimum glass size: from 1-5/8" x 1-5/8" (41.2 x 41.2 mm) and strips from 1-3/8" (35 mm) wide with 3/8" (10 mm) bevel.
    Power requirement: 70 amps @ 230 volt, 3 phase power.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.